BTNSP - 5301 EXT LATEX FLAT H P-WHITE

  • MSDS: BTNSP
  • Manufacturer: DESOTO INC
  • Product Name: 5301 EXT LATEX FLAT H P-WHITE
  • National Stock Number: 8010-00F034505
Product Identification

Product ID:5301 EXT LATEX FLAT H P-WHITE
MSDS Date:08/28/1990
FSC:8010
NIIN:00F034505
MSDS Number: BTNSP

Responsible Party
DESOTO INC
1700 S MT PROSPECT RD
DES PLAINES, IL 60017
US

Emergency Phone: 708-391-9000

Info Phone: 708-391-9123/708-391-9000

Preparer: WILLIAM P JOYCE

Cage: 62758

Contractor
DESOTO INC
DES PLAINES, IL 60018-1804 US

Telephone: 708-391-9000

Cage: 62758

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55 - 60%


NON-HAZARDOUS ADDITIVES-RESIN & PIGMENTS

Fraction By Weight: 25%


TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


MICA

Fraction By Weight: 5-10%


88.89 G/L

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXCESSIVE EXPOSURE MAY
CAUSE RESPIRATORY IRRITATION. SKIN/EYES: MAY CAUSE MILD IRRITATION.
INGESTION: MAY CAUSE GI IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHES, NAUSEA
Medical Cond Aggravated by Exposure:PRE-EXISTING RESPIRATORY & SKIN
CONDITIONS

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR IF REQUIRED.
KEEP WARM & QUIET. SKIN: WASH AFFECTED AREAS W/SOAP & WATER. DON'T
USE SOLVENTS. EYES: FLUSH W/WATER FOR 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:>200F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:COOL FIRE EXPOSED CONTAINERS W/WATER. WEAR
NIOSH/MSHA APPROVED SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE/EXPLODE
WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:DIKE & ABSORB W/INERT MATERIAL. AVOID CONTACT
W/SPILLED AREA. CONTAMINATED AREA MAY BE SLIPPERY.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. DON'T
STORE >120F. KEEP FROM FREEZING.
Other Precautions:DON'T TAKE INTERNALLY. PREVENT CONTACT W/CONTAMINATED
CLOTHING. FOLLOW LABEL WARNINGS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATORS
WHERE TLVS MAY BE EXCEEDED/IF SPRAY MIST IS PRESENT. FOLLOW
DIRECTIONS FOR RESPIRATOR USE.
Ventilation:EXHAUST/OPEN WINDOWS & DOORS/OTHER MEANS TO ENSURE FRESH
AIRENTRY DURING APPLICATION & DRYING.
Protective Gloves:PROTECTIVE REQUIRED
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:WASH FACILITIES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212F
Vapor Density:>1
Spec Gravity:1.31
Evaporation Rate & Reference:SLOWER THAN N BU AC
Appearance and Odor:LIQUID W/MILD ODOR
Percent Volatiles by Volume:70.9

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRE/EXCESS HEAT, TEMPS >120F & FREEZING
Hazardous Decomposition Products:CARBON, CO, CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL/STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.